Kenmore 110.60372710, Инструкция по использованию и уходу

Страница: 9 / 29

9
DRYER CARE
Keep dryer area clear and free from items that would block
the air flow for proper dryer operation. This includes clearing
piles of laundry in front of the dryer.
Cleaning the dryer interior
To clean dryer drum:
1.
Apply a liquid, nonflammable household cleaner to the
stained area of the drum and rub with a soft cloth until
the stain is removed.
2. Wipe drum thoroughly with a damp cloth.
Removing accumulated lint
From Inside the Dryer Cabinet
Lint should be removed every two years, or more often,
depending on dryer usage. Cleaning should be done by
a qualified servicer.
From the Exhaust Vent
Lint should be removed every two years, or more often,
depending on dryer usage.
Cleaning the dryer location
Changing the Sensing Cycle settings to increase
or decrease drying time
If all loads on all Automatic Cycles are consistently less dry
or more dry than you would like, you may change the default
settings to increase or decrease the default dryness level.
Your automatic drying settings can be adjusted to adapt to
different installations, environmental conditions, or personal
preference. This change is retained and will affect all of your
Automatic Cycles, not just the current cycle/load. There are
five drying settings, which are displayed using the time display:
0 Much wetter clothes, 30% less drying time.
1
Slightly wetter clothes, 15% less drying time.
2 Factory preset dryness level.
3 Slightly drier clothes, 15% more drying time.
4 Much drier clothes, 30% more drying time.
Cleaning the dryer interior (cont.)
3.
Tumble a load of clean cloths or towels to dry the drum
OR
Use a microfiber cloth and hot water in a spray bottle to
clean the drum and a second microfiber towel to dry.
NOTE: Items that contain loose dyes, such as denim blue
jeans or brightly colored cotton items, may discolor the dryer
interior. These stains are not harmful to your dryer and will
not stain future loads of clothes. Dry these items inside out
to avoid drum staining.
To change the drying settings:
NOTE: The settings cannot be changed while the dryer
is running or paused. The dryer must be in standby mode
(power is off) to adjust the default settings.
1. Before starting a cycle, touch and hold DRY LEVEL
for 3 seconds.
2. Touch DRY LEVEL to select the dryness level shown in the
time display: 0, 1, 2, 3, or 4.
3. Touch START/PAUSE to save the new dryness level setting.