Kenmore 110.60372710, Инструкция по использованию и уходу

Страница: 6 / 29

6
Towels and
bedding
Sanitize* Wrinkle Guard™
Cycle Signal
Extended high-heat drying cycle
intended to help sanitize items such
as bedding and towels. This cycle is not
recommended for all fabrics. For best
results, run cycle to completion; do
not interrupt.
Jackets,
comforters, pillows
Bulky/
Bedding
Damp Dry Signal
Wrinkle Guard™
Cycle Signal
Use for drying large, bulky items; do not
overfill dryer drum.
Heavyweight items
such as towels
and jeans
Heavy
Duty
Damp Dry Signal
Wrinkle Guard™
Cycle Signal
Use for drying large or heavy items.
Corduroys, work
clothes
Normal Damp Dry Signal
Wrinkle Guard™
Cycle Signal
Medium to large loads of mixed fabrics
and items.
No-iron fabrics,
cottons, perm
press, linens,
synthetics
Casual Damp Dry Signal
Wrinkle Guard™
Cycle Signal
For normal light- to medium-weight
fabrics. Drying time varies based on
fabric type, load size, and dryness
setting.
Lingerie, blouses,
washable knit
fabrics
Delicates Damp Dry Signal
Wrinkle Guard™
Cycle Signal
For gently drying delicate items.
Items to Dry: Cycle: Dry Temp: Dry Level:
†
Available
Options:
Cycle Details:
SENSING CYCLES:
Senses moisture in the load and shuts off when the load reaches the selected dryness level. The dry temperature
shown is the default temperature. This setting can be modified on some cycles but is not retained for future drying with this cycle. The
dryness level shown is the default dryness setting. This setting can be changed on some cycles and will be retained for future drying with
this cycle. Available options in bold are default settings for that cycle.
To get the most energy savings and enhanced fabric care from your dryer, use the Sensing Cycles. These cycles measure the drying
air temperature and moisture levels to turn the dryer off once the load reaches the selected dryness level. For electric models, dryer
performance and results may vary with service voltage less than 240.
* Extended high-heat drying cycle intended to help sanitize items such as sheets and towels. This cycle is not recommended for all fabrics. For best results, this cycle should
be run to completion to ensure sanitization; do not interrupt cycle.
CYCLE GUIDE–SENSING CYCLES
TIMED CYCLES:
Will run the dryer for the specified time on the control. Settings shown and options in bold are default settings
for that cycle.
CYCLE GUIDE–TIMED CYCLES
Any load Timed Dry 40 Wrinkle Guard™
Cycle Signal
Select a drying temperature based on the fabrics in your
load. If you are unsure of the temperature to select for a
load, select the lower setting rather than the higher setting.
Any load Touch Up 20 Wrinkle Guard™
Cycle Signal
Use this cycle to quickly refresh an item or remove light
wrinkles. The load is cooled slowly to reduce wrinkling and
make it easier to handle.
Small loads and
sportswear (2 to
3 items)
Express 15 Wrinkle Guard™
Cycle Signal
For small loads of two to three items.
Items to Dry: Cycle: Default
Time:
Available
Options:
Cycle Details:
† If loads do not seem as dry as you would like or are drier than you would like, select More Dry or Less Dry next time you dry
a similar load.
NOTE: Government energy certifications for this model were based on the Timed Dry cycle with the Maximum temperature setting.
The as-shipped defaults of Normal cycle, Dry Temp setting of 4 out of 5 dots, Dry Level setting of 4 out of 5 dots and Wrinkle Guard
were not used.