5
CONTROL PANEL AND FEATURES
2
1
7
5
4
6
3
5
1
POWER BUTTON
Touch to turn the dryer on and off. Touch to stop/cancel
a cycle at any time.
2
CYCLE KNOB
Use your cycle knob to select available cycles on
your dryer. Turn the knob to select a cycle for your
laundry load. See the “Cycle Guide” chart for detailed
descriptions of cycles.
Timed Cycles
Will run the dryer for the specified time on the control.
You may choose a temperature setting based on the
fabrics in your load. Drying time and temperature will
vary depending on your dryer model.
Sensing Cycles
Sensing cycles give the best drying in the shortest time.
Drying time will vary based on fabric type, load size,
and dryness setting.
3
LED DISPLAY AND SETTINGS
When you select a cycle, its default settings will light up
and the Estimated Time Remaining (for Sensing Cycles)
or actual time remaining (for Timed Cycles) will be
displayed.
Touch the setting names next to the display to adjust
settings. See “Cycle Guide” for available settings on each
cycle. Not all settings are available with all cycles.
Dry Temp
Select a drying temperature based on the fabrics in
your load. If you are unsure of the temperature to select
for a load, select the lower setting rather than the
higher setting. See the “Cycle Guide” chart.
NOTE:
Sensing Cycles allow temperature adjustment. At
most, three of the available temperatures (not including
Air) are allowed.
Dry Level
You may adjust the Dry Level on Sensing Cycles (except
for the Sanitize cycle), if desired.
NOTE:
Dry Level is for use with Sensing Cycles only.
Cycle Signal
The Cycle Signal produces an audible sound when the
drying cycle is finished. Promptly removing clothes at
the end of the cycle reduces wrinkling.
NOTES:
■
When the Wrinkle Guard™ option is selected and the
Cycle Signal is on, the tone will sound at 15 minutes, 30
minutes, and at the end of Wrinkle Guard™.
■
You may also turn off the tones that sound when
a cycle is selected, or when a feature or option is
touched. Touch and hold CYCLE SIGNAL for about
three seconds to turn sounds off or on.
4
TIME ADJUST
for Timed Cycles Only
Use + and – with Timed Cycles to increase or decrease
the length of a Timed Dry or Express cycle.
5
OPTIONS
Use to select available options for your dryer.
Wrinkle Guard™
When you are unable to remove a load of clothes
from the dryer as soon as it stops, wrinkles can form.
The Wrinkle Guard™ option periodically tumbles,
rearranges, and fluffs the load to help keep wrinkles
from forming.
■
Get up to 150 minutes of heat-free, periodic tumbling
at the end of a cycle. Touch WRINKLE GUARD™
to select On or Off at any time before the cycle
has ended.
NOTE:
If you open the dryer door prior to the end of
the Wrinkle Guard™ option, the dryer will go into Pause
mode. You will need to touch POWER
to turn off or
START/PAUSE
to continue Wrinkle Guard™ option.
Damp Signal
Touch to set the Damp Signal to on or off. When selected,
a series of beeps will sound when the load is damp, but
not completely dry. This will allow you to take clothes out
of the load that do not need to dry completely. This option
is not available on Sanitize and the Timed Cycles.
6
CYCLE STATUS LIGHTS
The indicator bar on the right side of the control will let
you know what stage of the drying cycle is in process.
Damp
This indicator shows that the load is partially dried and
items that you may wish to hang up or iron while still
damp may be removed.
Cool Down
The dryer has finished drying with heat, and is now
tumbling the load without heat to cool it down and
reduce wrinkling.
Complete
This will indicate that the selected cycle has ended and
the load may be removed from the dryer. If Wrinkle
Guard™ option has been selected, the dryer may
continue to tumble the load, even if the Complete
indicator is lit.
Wrinkle Guard™
This indicator will light if the Wrinkle Guard™ option has
been selected and is running. The dryer will periodically
tumble the load for up to 150 minutes after the cycle has
ended.
Check Lint Screen
The Check Lint Screen indicator light will flash as a
reminder to clean the lint screen. It will flash until the
door is opened or a cycle is started. It will turn off when
the dryer is turned off.
7
START/PAUSE BUTTON
Touch and hold START/PAUSE button for up to 3 seconds
or until the dryer starts to begin the selected cycle; touch
again to pause a cycle.
Содержание 110.60372710
Страница 15: ...15 ...
