Kendrion Kuhnke FIO AI4, Инструкция по эксплуатации

Страница: 19 / 195

Kendrion Kuhnke Automation GmbH System Description
(E 747GB-V2) 19
28. January 2020
1
2
U
n
l
o
c
k
b
u
t
t
o
n
Uninstalling a module
1
2
3
To Snap on a Single Module

Push up the module against the mounting rail from below, allowing
the metal spring to snap in between mounting rail and
mounting area as illustrated.
Push the top of the module against the mounting wall until it snaps in.
To Interconnect Two Modules

After snapping on the first module to the rail, snap on the second module about 1cm
away towards the right of the first module.

Push the second module along the rail towards the first module until you hear the locking
device snap in.
To Disconnect Two Modules

Push down the unlock button of the module that you wish to disconnect from the module to
the left of it.

With the button still pressed, push both modules away from one another until they are about 1
cm apart.
To Take Down a Single Module

Push the module up and against the metal spring located on the underside of the rail guide.

Tip the module away from the rail

as shown in the illustration.

Pull the module down and out of the mounting rail.
Rail mounting of module
U
n
l
o
c
k
b
u
t
t
o
n