www.kenall.com | P: 800-4-Kenall | F: 262-891-9701 | 10200 55th Street Kenosha, Wisconsin 53144, USA
This product complies with the Buy American Act: manufactured in the United States with more than 50% of the component cost of US origin. It may be covered by patents
found at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. ©2019 Kenall Mfg.Co.
1
INSTALLATION INSTRUCTIONS
F-2257-091118
Task Lighting
IMPORTANT SAFETY PRECAUTIONS
STRATALUME CONNECTS
™
1.
Wiring Module w/Hospital Grade Outlet
2.
Wiring Module w/Rocker Switch
1
2
AUC/MAUC SERIES – WIRING MODULE
• Shut off power before connecting wiring module to
electrical circuit.
• Install in accordance with all national, state, and local
codes.
• Do not connect to an ungrounded supply.
• Wiring module is intended for undercabinet or
undershelf mounting for use in conjunction with the
Stratalume Connects
TM
undercabinet light fixtures.
Failure to install on a mechanically-sound surface may
result in personal injury, fixture damage, or potential
fire hazard.
This instruction sheet applies for the Stratalume Connects
TM
WML, WML/SW, WML/HGO, WMD, WMD/SW, WMD/
HGO and WMD/MS wiring modules. These accessories are designed to decrease installation time of series-mount
fixtures by eliminating the need to electrically wire each fixture.
The WML series of wiring modules are used in conjunction with the AUCSL, AUCDL, and AUCLED fixture series. The
WMD series of wiring modules are used in conjunction with the AUCSD and AUCDD series.
GENERAL
SEE FIXTURE LABEL OR ANY APPLICABLE RESTRICTIONS.
• Do not install outdoors or in applications not intended
for use.
• Read all markings and labels to ensure correct
installation of wiring module. Supplemental instructions
may be located within the wiring module, in addition to
this instruction sheet, regarding orientation, mounting
restrictions, or optional equipment.
• Read additional instructions provided with the
Stratalume Connects
TM
light fixture(s).
IMPORTANT SAFEGUARDS
When using electrical equipment, basic safety precautions
should always be followed, including the following:
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE
APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH
THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND
THE HAZARDS INVOLVED. DISCONNECT POWER TO ALL CIRCUITS
BEFORE WIRING FIXTURE. INSTALL IN ACCORDANCE WITH
ALL NATIONAL, STATE, AND LOCAL CODES. DO NOT CONNECT
TO AN UNGROUNDED SUPPLY. READ ALL FIXTURE MARKINGS
AND LABELS TO ENSURE CORRECT INSTALLATION OF FIXTURE.
SUPPLEMENTAL INSTRUCTIONS MAY BE LOCATED ON THE
FIXTURE, IN ADDITION TO THIS INSTRUCTION SHEET, REGARDING
ORIENTATION, OR MOUNTING RESTRICTIONS.
SAVE THESE INSTRUCTIONS
