www.kenall.com | P: 800-4-Kenall | F: 262-891-9701 | 10200 55th Street Kenosha, Wisconsin 53144, USA
This product complies with the Buy American Act: manufactured in the United State swith more than 50% of the component cost of US origin It may be covered by patents
found at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. ©2019 Kenall Mfg.Co.
1
INSTALLATION INSTRUCTIONS
HES_F-2589-091118
IMPORTANT SAFEGUARDS
When using electrical equipment, basic safety precautions
should always be followed, including the following:
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE
APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH
THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND
THE HAZARDS INVOLVED. DISCONNECT POWER TO ALL CIRCUITS
BEFORE WIRING FIXTURE. INSTALL IN ACCORDANCE WITH
ALL NATIONAL, STATE, AND LOCAL CODES. DO NOT CONNECT
TO AN UNGROUNDED SUPPLY. READ ALL FIXTURE MARKINGS
AND LABELS TO ENSURE CORRECT INSTALLATION OF FIXTURE.
SUPPLEMENTAL INSTRUCTIONS MAY BE LOCATED ON THE
FIXTURE, IN ADDITION TO THIS INSTRUCTION SHEET, REGARDING
ORIENTATION, OR MOUNTING RESTRICTIONS.
SAVE THESE INSTRUCTIONS
Install in compliance with Class I, Division 2 wiring methods in the National Electrical Code, any applicable local
codes and any specific instructions given on the luminaire labels. If installing in conjunction with any additional
options and/or accessories, also refer to the respective instruction sheets. Installation required by a qualified
electrician only.
NOTE: To maintain the ratings and approvals noted on the fixture nameplate, any fittings or mounting hardware
supplied with this fixture, must be used with this fixture. If lag screws are provided and the mounting surface does
not facilitate the use of the lag screws, alternate hardware can be used, provided the enclosed nylon washer is used
under the head of the fastener. The conduit hub shipped with the fixture must also be used with the wiring method
selected to maintain the integrity of the fixture.
Read all fixture markings and labels to insure correct installation of the fixture. Additional information may be
located on the fixture, separate from this instruction sheet, regarding orientation and mounting restrictions.
INSTALLATION INSTRUCTIONS
Luminaires for Sealed Enclosure Applications
ENVIROSEAL
™
HES SERIES
