X5 FastMig
Operating manual - EN
1.4.2 Wire feed mechanism
X5 Wire Feeder 300 wire feed mechanism:
1.
Drive rolls and drive roll mounting caps
2.
Middle guide tube locking clip
3.
Middle guide tube
4.
Inlet guide tube
5.
Pressure handles
6.
Pressure rolls and pressure roll mounting pins
7.
Pressure roll locking arms
8.
Outlet guide tube.
For replacing the wire feed rolls, refer to "Installing and replacing feed rolls" on page 59.
For replacing the wire guide tubes, refer to "Installing and replacing wire guide tubes" on page 63
1.4.3 Manual control panel (X5 FP 300R)
This section describes the controls and features of the X5 Wire Feeder 300 Manual control panel (membrane panel).
© Kemppi
17
1920960 / 2144
