Kemppi Kemppi A7 MIG Welder 350, Руководство по эксплуатации, Страница: 22 / 65

22
A7 MIG Welder © Kemppi Oy 2017 1735
OPERA
TING M
ANU
AL
4.2.4 User settings
User settings menu (Main menu 2/8) (login required)*
Menu item Value range Factory value Description
1/5 Change PIN
code
Change your PIN code.
New PIN code 0000 - 9999 0000 Specify a new PIN code.
2/5 User mode ON, OFF OFF Set the user identification mode
on and off.
3/5 Set the user
rights
Change the role for a user.
Select user USER1 - USER10 Select the user whose role you
want to change. Note! You cannot
change your own role.
Level Welder,
Supervisor,
Administrator
Select the role for the user.
4/5 User activation Create and delete users.
User activation USER1 - USER10 Select the user account that you
want to create /delete.
User Enabled,
Disabled
Create an account by setting
the user Enabled, or delete the
account by selecting Disabled.
5/5 Reset user PIN
code
Reset the PIN code of a user.
Select user USER1 - USER10 Select the user whose pin code
to reset. The reset value is 0000.
Confirm the reset by pressing OK
soft button.
* See section 4.4 User identification for more information.
4.2.5 Welding system settings
System config menu (Main menu 4/8)
Menu item Value range Factory
value
Description
1/20 Water cooling OFF, ON, AUTO AUTO Set the water cooler on and
off, or let the system control
the cooler (AUTO). In auto
mode the water pump starts
when welding starts and
stops after a delay when
welding stops.
2/20 Cable length 10 - 100 m 10 m Set the welding circuit length
for optimal arc control.
3/20 FineCalib 0 V - 10 V /
100 A
10 V / 100 A Set the compensation for
cable resistance variation.
4/20 System clock View and modify the system
time and date.
5/20 Device information Review the following device
information for each device
in the system:
DevSW: Unit software
version.
SysSW: System base software
version.
BootSW: Boot software
version.
SW Item: Software item
number.
Serial: Device serial number.
Prog: Programmer name.
Date: Programming date.
6/20 Restore settings
ROBOT All settings
All memory channels (0-199)
are restored from backup.
Setup settings remain as they
are.
Restore to factory All memory channels and
their backups are removed.
All settings are set to default
factory values.