Kemppi A5 MIG 1500, Руководство по эксплуатации, Страница: 8 / 19

8
A5 MIG Orbital System © Kemppi Oy 2021 R01
OPERA
TING M
ANU
AL
3. OPERATION
3.1 Carriage functions
1. STOP button on top of the carriage is the same as
in the remote control device
2. Display to show menu settings and their values
3. Menu button move from one menu to another
4. Scroll left/right buttons to change values of menu
settings
3.2 Carriage control panel
3.2.1 Start menu
P1 CH off
<8> 45

6mm
This is the initial view on the carriage display.
1. Program number (P1)
2. Remote memory channels on/off (CH Off)
3. Carriage speed (8 cm/min)
4. Weaving speed (45 mm/s)
5. Weaving width (6 mm)
Press MENU to continue.
3.2.2 Menu options
Program selection
P1 CH on
<8> 45

6mm
The item to be adjusted (P1) is blinking in the display.
Select the program to store the settings:
1. Use + and – buttons to browse programs.
2. Select the program to use: P1…P5.
3. Press MENU to continue.