1
OPERATOR’S MANUAL FOR
10,000 RPM 8 in. (200 mm) RANDOM ORBITAL SANDERS
Recommended Airline
Size - Minimum
10 mm
3/8 in
Recommended Maximum
Hose Length
8 meters
25 feet
Air Pressure
Maximum Working Pressure 6.2 bar 90 psig
Recommended Minimum
NA
NA
A-FSH-O 8" TWO HAND AIR RANDOM ORBITAL SANDER
WARNING
OIL DAILY
Operators Instructions
Includes - Product Highlights and Suggested Applications, Specifi-
cations, Please Read and Comply, Assembly Drawing of Machines,
Parts List, Proper Use of Tool, Work Stations, Putting the Tool into
Service, Operating Instructions.
Important
Read these instructions carefully before installing, operating, ser-
vicing or repairing this tool. Keep these instructions in a safe ac-
cessible location.
Always wear safety
goggles to protect
your eyes.
Oil daily for superior
Performance.
Please Read and Comply With
Specifications
1) General Industry Safety & Health Regulations, Part
1910, OSHA 2206, available from: Superintendent of
Documents; Government Printing Office; Washington
DC 20402
2) Safety Code for Portable Air Tools, ANSI B186.1 avail-
able from: American National Standards Institute, Inc.;
1430 Broadway; New York, NY 10018
3) State and Local Regulations.
Key parts of the above regulations are excerpted below.
They are not intended to be inclusive. Study and comply
with all regulations.
1)
TOOL INTENT – Tool shall be used only for purposes
intended in its design.
2) AIR SUPPLY – Test and operate tools at 90 PSIG (6.2
Bar) maximum unless tool is marked otherwise. Use
recommended airline filters - regulators - lubricators (FRL).
3) UNUSUAL SOUND or VIBRATION – If tool vibrates or
produces an unusual sound, repair immediately for correction.
4) OPERATOR PROTECTIVE EQUIPMENT – Wear goggles
or face shield whenever tool is in operation.
Other protective clothing shall be worn, if necessary.
SEE REGULATIONS.
5) SAFETY MAINTENANCE PROGRAM – Employ a safety
program to provide inspection and maintenance of all phases
of tool operation and air supply equipment in accordance with
“Safety Code for Portable Air Tools.”
Features Include :
•
Variable Speed Control with Palm Style On/Off Lever
•
Ergonomic Cushion-Grip for Comfort and Stability
•
Low Profile for Control and Comfort
•
Rear Exhaust Directs Air away
•
Suggested Applications: Sanding and Finishing a Variety of Materials including Wood, Metal,
Plastic, Fiberglass Composites, Solid Surfaces and other Sandable Surfaces
A-FSH-O81-O A
