6. Setup
MKC-710 77
Operator
6-2.
Up to 10 operators can be registered with individual names. The registered
name will be automatically printed out together with measurement results.
(Characters: alphanumeric capital letters)
Select “
2
．
Operator” with [
↑
][
↓
] and press [ENTER].
[Current No.]
Select the number of the operator you wish to put on the measurement data. Select
with [
←
] [
→
] keys and press [ENTER].
To enter an operator: Move the cursor with [
↑
] [
↓
] keys to the number (01 to 10)
you wish to enter. Press [ENTER]. Then enter a name with [
↑
] [
↓
] [
←
] [
→
] keys,
and press [ENTER] again. Up to twenty (20) letters can be input.
