090822JH
1/2 | 800.789.3810 | [email protected]
FX3D
Angled Mounting Clip Installs
SAFETY PRECAUTIONS
damage
Remove from power
source immediately if any
damage is found in the
LED strip or cabling.
product modifications
Product is NOT to be
modified in the field.
Modifications will void ETL
listing and warranty.
cable handling
The first 2.36" (60mm) of
the cable should maintain
its natural state before any
bending occurs.
secure connections
Ensure all electrical
connections are insulated
and secure before
applying power.
bending limits
Do not bend product
smaller than bending
diameter: 9.40" (300mm).
9.40"
proper connections
Connect power feed to
appropriate power source
or controls.
power testing
Do not power up while
coiled for over 30
minutes. This may lead to
overheating and damage.
kelvix accessories
The use of third-party
accessories must be
pre-approved by Kelvix.
Failure to do so will void
manufacturer warranty.
2.36"