Kelly KLS-H Sinusoidal Brushless Permanent Magnet Motor Controller User
’s Manual
V 1.2
5
2.3 Specifications
•
Frequency of Operation: 10KHz or 20KHz.
•
Standby Battery Current: < 0.5mA.
•
5V or 12V Sensor Supply Current: 40mA.
•
The PWR can be 96V batteries for KLS96xxx-8080H model. So All KLS-H and KLS-8080H
model are non isolated type controllers.
•
Supply Current, PWR, 30mA Typical.
•
Configurable battery voltage range, B+. KLS24V model: B+.Max operating range: 20V to 30V.
•
Standard Throttle Input: 0-5 Volts(3-wire resistive pot), 1-4 Volts(hall active throttle).
•
Throttle Input: 0-5 Volts. Can use 3-wire pot to produce 0-5V signal.
•
Full Power Operating Temperature Range: 0
℃
to 70
℃
(MOSFET temperature).
•
Operating Temperature Range: -40
℃
to 100
℃
(MOSFET temperature).
•
Max Battery Current : Configurable.
