Kellfri 35-XKE240, Руководство пользователя

Страница: 3 / 36

3
Table of Contents
INTRODUCTION
Thank you for choosing a product from Kellfri AB. Compliance with the safety instructions,
operating manual and sound common sense will guarantee many years of enjoyment using
the product. Kellfri’s equipment and products are aimed at self-employed farmers, horse en-
thusiasts and other country-dwellers who have stringent performance demands.
PRODUCT INFORMATION
The XKE240 flail mower is a powerful machine for those of you with high performance demands
when driving over dense vegetation, for example. Adapted for tractors between 90-100 hp. The
working width is 2.4 m, making it practical for flailing, topping or cutting medium-sized or large
grasslands and grassed areas. The flail mower has a coarse-toothed welded counter bar in the chas-
sis to break up the grass more effectively, and detachable counter blades to keep the grass in the
machine and enable more material to be cut.
The cutting height is adjusted by the support roller and skids. The adjustable support roller guaran-
tees a correct cutting height on uneven ground. The cutting height can be adjusted between 0-70
mm, enabling you to cut the grass close to the ground and thus achieve a more level result. The
grass is evened out and the remnants moulder away faster. The support roller has a scraping iron to
keep the roller free from cut material. The support roller is built into the chassis to cope with tough
terrain, and is protected in the event of collision with obstacles .
The front of the flail mower is fitted with chain guards that adapt to the substrate and protect both
the tractor and the surroundings from stone chipping and grass spray.
The flail mower is fitted as standard with hammer flails. The flail mower is also adapted for Y-flails,
which can be purchased additionally (not included).
This flail mower is equipped as standard with hydraulic side shift adjustment, which enables you to
shift the machine to the left or right. The side shift adjustment means that you can cut at the side of
your tractor and thereby reach areas that would otherwise be difficult to reach.
The hydraulic side shift adjustment enables you to drive with just one pair of wheels in the uncut
area and cut closer to ditches, fences, etc.
The mower has an openable flap. You open the flap when you know you are cutting or topping
ground that generates a higher flow of material. This enables you to drive freely under the same
conditions as with a closed flap and a normal flow of material. You save on fuel and reduce wear on
the belts, and you can also operate at a higher speed, as the grass does not become twisted around
the roller. The grass is also spread more evenly.
TECHNICAL DATA 35-XKE240
Length x width x height 2610 x 1290 x 935 mm
Working width 2400 mm
Operating height 0 - 70 mm
Weight 778 kg
Hydraulic side shift adjustment Yes
Openable flap Yes
PTO shaft Standard
Power requirement 90-100 hp
Flails, hammer 18 (Y-flails can be purchased additionally, not included)
RPM 540
3-point linkage Cat. 2
Gearbox - transmission oil 80W-90 approx. 1.5 – 1.8L