Kellfri 35-VKMATV150HXL, Руководство оператора, Страница: 20 / 28

20
TABLE OF CONTENTS
20
3.) The drawbar can be mounted in different positions: in the center of the cutting unit straight
behind the ATV or move the drawbar to the left for cutting aside. Chose the desired cutting
position and install the drawbar. Note The turn buckel (Figure 4) must be mounted under the
drawbar. Remove the shaft and mount the drawbar, lift the drawbar assembly (Fig. 5), mount
the turn buckle and tighten the bolt (he turn buckle may need to be extended for easier as-
sembly.
fig. 4
fig. 5
RECYCLING
When disposing of the tool be disassembled and transported to the municipality destined
place. Contact your local authority for further information.
bild 6