Kellfri 35-VKMATV150HXL, Руководство оператора, Страница: 19 / 28

19
TABLE OF CONTENTS
19
ASSEMBLY
The machine is delivered partially assembled. CAUTION! The machine is heavy! It is recom-
mended that the assembly is carried out by 2 persons. Lifting device may be required. Risk of
crushing!
1.) Remove the transport crate and remove all parts packed together with the machine
1x - cutting unit with motor
2x - Boggie with 2 wheels (right and left)
1x - Towing bar
(fig. 1)
NOTE!
Bolts etc are mounted onto the machine.
2.) Remove nuts that are located on the wheel axle (right and left side, then install both wheels.
Note: The sleeve (Fig. 2) must be mounted on the outer side of the boogie. Important! Install
the wheels correctly. The wheel tracks should point towards the driving direction, there’s an
arrow on the wheel that shows the direction of wheel rotation.
fig. 2
the sleeve must be mounted
on the outer side the boogie
IMPORTANT!