Kellfri 35-VKM195H, Руководство пользователя

Страница: 12 / 24

Table of contents
12
MAINTENANCE AND SERVICE
Make sure the implement is stable and there’s no risk of falling over during maintenance and
service. Replace damaged and worn parts immediately to reduce the risk of machine failure
and injuries. Perform maintenance, service and inspections as recommended. Use only spare
parts with equivalent performance to reduce the risk of damage and failure.
Check that all bolts and nuts are tightened after maintenance and service. Always test the
machine before starting work.
RECYCLING
Dispose the product correctly, disassemble and transport to the municipality’s
recycling station. Contact your local authority for further information.
Dispose broken parts correctly when recycling.
Important!
SERVICE INTERVAL
Flails Before each run. Replace all damaged flails. Sharp flails give
better results. When replacing bolts, tight-
en bolts properly.
During operation. Listen for unusual noise.
After each run. Check
Gearbox Before each run. Check the oil level:
Oil type: transmission oil 80W-90 (1,5L)
50 operating hours First oil change.
100 operating hours or at
least once a year.
Oil change.
Grease in the tube
(amount/type): 0,2L/ 80w90
Rotor 20:e operating hour Lubrication.
Belt After 1 hour of driving.
Regularly.
Check and tighten the belt. At pressure the
belt should be moved 20 mm.
The machine After each run. Rinse soil and grass with water.
Lubrication First time after 2 hours of
operation.
After 20 operating hours.
Lubricate all grease fitting regularly.