background image

5

Table of contents 

SURROUNDINGS

Check that the work area is free from bystanders and objects before hitching or using the equip-

ment. Otherwise, there is a risk of serious injury. Be extra careful if there are children in the vicinity 

of the area where the equipment or product is used or stored. Check that there are no low-hang-

ing electrical cables within the work area. Exercise caution when working on slopes and close to 

ditches. 

Always work alone with equipment or products that are made for working alone. Never leave rub-
bish in the work area, and keep work surfaces clean. Always respect the equipment’s risk zone.

BEFORE USE

Carefully read the safety instructions and the operating manual. Make sure that you understand 

the safety instructions, the operating manual and warning decals. Use common sense and suitable 

personal protective equipment when using the product. Always check the performance of the ma-

chine combination to be used. It is important that these are compatible and work satisfactorily 

together. This is to ensure that the equipment or product works as expected, and to guarantee the 

safety of yourself and others. Carry out a visual inspection of the equipment or product before use. 

Repair or replace damaged or worn parts immediately to reduce the risk of injury. Grease moving 

parts and check that all nuts and bolts are tightened. Repair if necessary. Learn and remember the 

correct working method. Beginners must work slowly until they have learned how the machine or 

product works. 

Users/customers are responsible for ensuring users can handle the situation. If a user feels that the 

machine is dangerous to use, they should not use it until they have received thorough training.

WARNING! 

Never use equipment or products with defective safety components.

Children must not be left unsupervised in the area!

Warning! 

Содержание 23-TV15ATV

























Отзывы: