Kellfri 23-TV07PRO, Руководство по эксплуатации

Страница: 8 / 24

8 Table of contents
LOAD THE TRAILER COR-
RECTLY!
CARE INSTRUCTIONS
1.
Do not overload the tractor and trailer.
2. After wheel replacement, check that the wheel
nuts are tightened and repeat when stabilised after
a few miles of driving. The tightening torque must
not exceed 45 kpm.
Use a torque wrench if possible.
3. Check that the bearing setting is correct to
prevent bearing play and abnormal bearing wear.
The bearing setting should preferably be too loose
than too tight.
2
3
MAINTENANCE AND SERVICE
• Make sure that the equipment is stable and cannot tip over when carrying out
maintenance and service work.
• Replace damaged or worn parts to reduce the risk of injuries.
• Carry out maintenance, service and checks in line with recommendations.
• Only use spare parts with equal performance to reduce the risk of injuries and breakdowns.
• All electrical repairs and electrical connections must be carried out by a qualified person.
Check that all nuts and bolts are tightened after maintenance and service work.
• Always test the trailer before starting work.
IMPORTANT!
Avoid over-lubricating. Dirt collects easily on exposed grease and causes
increased wear. After lubrication, wipe excess grease off from couplings.
Spare parts
Inner wheel bearing:
R10-30206
Outer wheel bearing:
R10-30204