Kellfri 13-KW340, Руководство пользователя, Страница: 3 / 24

Table of contents 3
Kellfri AB is constantly working to further develop its products, and therefore reserves the right to make changes
to, among other things, design and appearance without prior notice.
INTRODUCTION
Thank you for choosing a product from Kellfri AB. By following the general safety information,
instruction manual and common sense you will get many years of enjoyable use of the prod-
uct. Kellfri’s tools and machines are aimed for farmers with high demands on functionality.
PRODUCT INFORMATION
KW430 Combined machine is equipped with a electic chainsaw, Bar Oregon and Oregon
Chain, The chainsaw can handle up to 34 cm thick logs. The machine can split logs into 2 or 4
pieces. The height of the knife is adjustable. The machine is equipped with a hitch and 3 phase
inverter as standard.
The electric chainsaw must be connected to a separate 230 V outlet.
USE OF PRODUCT
Only for cutting and splitting logs. The machine is for outdoor use only.
TECHNICAL SPECIFICATION 13-KW340
Cutting diameter 340 mm
Cut length min - max 150 - 600 mm
Compression Force 7 tonnes
Engine 4 kw
RPM 1400 rpm
Fuse 16 amp
Hydraulic oil tank 35 l
Oil flow 26 l/min
Electric saw 2,2 kW
Blade length 400 mm
Chain 3,25
Wheel 600-9
Towing 50 mm coupling
Three-phase with the phase inverter Standard
Length x Width x Height 3000 x 1100 x 1250 mm
Danger!
The machine can be dangerous when used incorrectly. Therefore,
it is required that the operator has sufficient knowledge about the machine
how works, all functions and how to operate it.