12
Varning!
Använd aldrig ett redskap eller produkt med defekta säkerhetsdetaljer.
SAFETY MEASURES BEFORE OPERATING
Read the safety information and instruction manual carefully. Be sure you understand
the safety measures, instruction manual and warning labels. Use common sense when
operating the machine and use appropriate personal protective equipment.
Always check the performance and the machine combination that are used. It’s highly
important these matches in a satisfactory manner. This is to ensure the product or the
function and most important yours and others safety.
Do visual inspection of equipment or product before use. Fix or replace damaged or
worn parts immediately to reduce the risk of injury. Lubricate moving parts and check
that all screw-nuts and bolts are tightened.
Learn and remember the correct working methods. Beginners should keep a low speed
until the person has learn the proper use of the machine/product. The user/customer is
responsible to handle the situation correctly. Do not use the machine if it is experienced
to be dangerous for the user.
•
The machine comes with five-pole connection glove CEE 16A (3-phase + N
ground). The glove must be connected to a corresponding socket, which must be
installed by a qualified electrician. NOTE! In order for the machine to work, connect it
to a neutral-conductor outlet!
•
The combined machine is tested before delivery and delivered filled with hydraulic oil
SHS 32, motor guard and connection glove are installed.
•
The electrical chainsaw must be connected to a separate socket (230 V). Ensure that
the power socket is grounded.
•
Place the machine on a level and stable surface. Make sure that it can not tip-over
•
Fold down the collector table.
•
Familiarize yourself with the machine without starting it.
•
Test the safety switch: Start the machine, open the lock and lift the cover over the
splitting zone, the machine will shut down automatically as soon as the safety mecha-
nism located behind the machine is disabled. Do not use this machine if this does not
occur. The machine must not be used until the fault is corrected.
