Kellfri 13-KW340 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 24

Kellfri 13-KW340 Скачать руководство пользователя страница 10

Table of contents

10

Never touch the chain while the engine is running.

Before using the machine you must read the sections entitled

“SAFETY”

and

“PRODUCT IN-

FORMATION”.

We recommend that you start by practicing sawing smaller logs. This also helps

you to learn the proper use of the chainsaw.

Always follow the safety rules. The chainsaw must only be used to cut wood. It is forbidden

to cut any other types of materials. Vibrations and kickback vary between different materials

and the requirements for safety are not met by cutting into other materials. Do not use the

chainsaw as a lever to lift, move, or to share objects. Lock it in fixed positions. It is forbidden to

assemble the tools or attachments that are not specified by the supplier.

It is not necessary to force the chainsaw to cut the log . Apply only light pressure while the

engine is running at full throttle. Do not try to pull out the chain saw with violence if it gets

stuck in the cutter, but use a wedge or a skewer to break up the log.

STARTING THE ENGINE

Plug the saw’s power cord into an outlet. Start the chain saw by pressing the throttle. Always

hold the saw firmly with both hands when the engine is running. Use a firm grip with thumbs

and fingers around the handle. Keep all body parts away from the machine while the engine is

running. Before starting the engine, make sure that the chain is not touching anything.

INSTALLING NEW CHAIN

New chains are stretched out and must be adjusted periodically. Adjusting the chain should

only be done when the chain is cold. First lubricate the chain and bar with oil, then start the

chain saw and put it on it’s average speed. Make sure the oil pump is working properly. Stop

the engine and adjust the chain’s tension. Start the saw again and make a pair of cut on a log

to warm up the chain. Stop the engine and let the chain cool and adjust again. Repeat this

process until the chain gets the right tension. Do not touch the ground with the chain.

DANGER!

CHECK THE OIL PATTERN

Start the engine and drive chain on the average

speed and see if the oil is spreading as shown in

the picture

«
...
8
9
10
11
12
...
»

Содержание 13-KW340

























Отзывы:

Нет отзывов