Keithley TEC SourceMeter 2510, Руководство по обслуживанию, Страница: 83 / 120

6-2 Replaceable Parts Models 2510 and 2510-AT
Introduction
This section contains replacement parts information and component layout drawings for the
Model 2510.
Parts lists
The electrical parts lists for the Model 2510 are shown in the tables at the end of this section.
For part numbers to the various mechanical parts and assemblies, use the Miscellaneous parts
list and the assembly drawings provided at the end of Section 5.
Ordering information
To place an order, or to obtain information concerning replacement parts, contact your
Keithley representative or the factory (see inside front cover for addresses). When ordering
parts, be sure to include the following information:
• Instrument model number (Model 2510)
• Instrument serial number
• Part description
• Component designation (if applicable)
• Keithley part number
Factory service
If the instrument is to be returned to Keithley Instruments for repair, perform the following:
• Call the Repair Department at 1-800-552-1115 for a Return Material Authorization
(RMA) number.
• Complete the service form at the back of this manual, and include it with the
instrument.
• Carefully pack the instrument in the original packing carton.
• Write ATTENTION REPAIR DEPARTMENT and the RMA number on the shipping
label.
Component layouts
The component layouts for the circuit boards are provided on the following pages. Drawings
include:
• Mother board — 2510-100
• Display board — 2400-110
2510-902-01 (E - Mar 2010)(Service).book Page 2 Tuesday, March 16, 2010 1:04 PM