![background image](http://html1.mh-extra.com/html/keithley/sourcemeter-2600-series/sourcemeter-2600-series_reference-manual_4098633068.webp)
2-16 TSP Programming Fundamentals
Series 2600 System SourceMeters Reference Manual
2600S-901-01 Rev. A / May 2006
Return to
Opening communications
In order to activate communications between Test Script Builder and the
SourceMeter, an instrument must be opened. The tool bar on the Instrument
Console tab is used to open or close communications.
illustrates how to open and close communications. The following
details supplement the information in the drawing:
The Select Instrument window has a drop-down menu to select the GPIB or
RS-232 interface being used by the Series 2600.
Simulate communications - If you select the Simulate option in the Select
Instrument window, the Instrument Console will become active even though there
will be no actual communication with the SourceMeter. You can simulate running
a script or sending a command, but the SourceMeter will not respond.
NOTE The drop-down menu for the Menu icon can also be used
to open or close communications between TSB and the
SourceMeter. See “
this section for details on using the Menu icon.
Содержание SourceMeter 2600 Series
Страница 507: ...AppendixA Specifications Appendix A topics Model 2600S Specifications page A 2 2600S 901 01 Rev A May 2006...
Страница 575: ...AppendixF DisplayCharacterCodes Appendix F topics Introduction page F 2...
Страница 592: ......
Страница 593: ......