12-46 Instrument Control Library
Series 2600 System SourceMeters Reference Manual
2600S-901-01 Rev. A / May 2006
Return to
gpib
attribute
The following attribute is used to set the GPIB address.
Attribute
GPIB address.
Usage
address = gpib.address
-- Reads address.
gpib.address = address
-- Writes address.
address
Set from 0 to 30.
Remarks
• A new GPIB address takes effect when the command is processed. If there are
response messages in the output queue when this command is processed they
must be read at the new address.
• The user should allow ample time for the command to be processed before
attempting to communicate with the instrument again. After sending this command,
make sure to use the new address to communicate with the instrument.
• The GPIB address is stored in non-volatile memory. The
reset
function has no
effect on the address.
Details
See “
” in
.
Example
Sets the GPIB address of the Series 2600 to 26 and then reads the address:
gpib.address = 26
address = gpib.address
print(address)
Output:
2.01
gpib.address
Содержание SourceMeter 2600 Series
Страница 507: ...AppendixA Specifications Appendix A topics Model 2600S Specifications page A 2 2600S 901 01 Rev A May 2006...
Страница 575: ...AppendixF DisplayCharacterCodes Appendix F topics Introduction page F 2...
Страница 592: ......
Страница 593: ......