Keithley SourceMeter 2470, Руководство пользователя

Страница: 39 / 86

Model 2470 High Voltage SourceMeter Instrument User's Manual Section 3: Using a remote interface
2470-900-01 Rev. A /
May
2019 3-15
Review events in the event log
The event log records all LXI events that the instrument generates and receives. The log includes the
following information:
•
The EventID column, which shows the identifier of the event that generated the event message.
•
The System Timestamp column, which displays the seconds and nanoseconds when the event
occurred.
•
The Data column, which displays the text of the event message.
To clear the event log and update the information on the screen, select the Refresh button.
Determining the command set you will use
You can control the 2470 with command sets that are based on the SCPI or Test Script Processor
(TSP
®
) programming languages. You can change the command set that you use with the 2470. The
remote command sets that are available include:
•
SCPI: An instrument-specific language built on the SCPI standard.
•
TSP: A scripting programming language that contains instrument-specific control commands that
can be executed from a stand-alone instrument. You can use TSP to send individual commands
or use it to combine commands into scripts.
If you change the command set, reboot the instrument.
You cannot combine the command sets.
As delivered from Keithley Instruments, the 2470 is set to work with the SCPI command set.
To set the command set from the front panel:
1. Press the MENU key.
2. Under System, select Settings .
3. Select the appropriate Command Set.
You are prompted to confirm the change to the command set and reboot.