Keithley SourceMeter 2470, Руководство пользователя

Страница: 36 / 86

Section 3: Using a remote interface Model 2470 High Voltage SourceMeter Instrument User's Manual
3-12 2470-900-01 Rev. A /
May
2019
Using the web interface
The 2470 web interface allows you to make settings and control your instrument through a web page.
The web page includes:
•
Instrument status.
•
The instrument model, serial number, firmware revision, and the last LXI message.
•
An ID button to help you locate the instrument.
•
A virtual front panel and command interface that you can use to control the instrument.
•
Ability to download data from specific reading buffers into a CSV file.
•
Administrative options and LXI information.
The instrument web page resides in the firmware of the instrument. Changes you make through the
web interface are immediately made in the instrument.
When the LAN and instrument establish a connection, you can open the web page for the instrument.
To access the web interface:
1. Open a web browser on the host computer.
2. Enter the IP address of the instrument in the address box of the web browser. For example, if the
instrument IP address is 192.168.1.101, enter
192.168.1.101
in the browser address box.
3. Press Enter on the computer keyboard to open the instrument web page.
4. If prompted, enter a user name and password. The default is
admin
for both.
If the web page does not open in the browser, see LAN troubleshooting suggestions (on page 3-13).
To find the IP Address of the instrument, press the Communications indicator in the upper left corner
of the home screen.