Keithley PIO-32, Руководство пользователя

Страница: 25 / 76

3-5
8. On the System Settings Changed dialog box, click No . (The system
will be rebooted and configured later under “Configuring Your
Installation.”) The screen returns to the Windows desktop.
9. Print out one section of a DriverLINX manual that you will briefly
review later during system configuration. Proceed as follows:
a. In the Start menu under Programs
→
DriverLINX, click
On-line Manuals. A menu document appears
b. In the menu document, scroll until you find the major category
Configuration .
c. Under Configuration click Hardware References . A list of
documents appears.
d. In the list of documents, click Keithley PIO Series . Acrobat
Reader opens and the manual entitled Using DriverLINX with
Your Hardware—Keithley PIO Series appears.
e. Print the following section from the Using DriverLINX with
Your Hardware—Keithley PIO Series manual: “Configuring the
PIO Series.”
Note:
If your data acquisition system is not connected to a printer, you
can display and print the Using DriverLINX with Your Hardware—
Keithley PIO Series manual sections from another system, directly from
the CD-ROM (without installing anything). To display the manual, open
the Windows Explorer, then double click on
X:\Drvlinx4\Docs\Notes\kmbpio.pdf, where X = the letter of the
CD-ROM drive. Acrobat Reader must already be installed on the other
system. If necessary, you can first install Acrobat Reader directly from the
CD-ROM by double clicking X:\Acrobat\setup.exe.
10. Continue with the next section, “Configuring Your Installation.”