Keithley KPCI-PIO24 Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 66

Keithley KPCI-PIO24 Скачать руководство пользователя страница 22

KPCI-PIO24 User’s Manual

Installation

3-5

Installing and connecting the KCPI-PIO24 board

The following sections describe how to install and connect the KCPI-PIO24 board. The sections
are ordered in the recommended installation sequence.

Installing the board

CAUTION

Ensure that the computer is turned off before installing or
removing a board. Installing or removing a board while power is
ON can damage your computer, the board, or both.

Handle the board at the mounting bracket, using a grounded
wrist strap. Do not touch the circuit traces or connector contacts.
If you do not have a grounded wrist strap, periodically discharge
static electricity by placing one hand firmly on a grounded metal
portion of the computer chassis.

Use the following steps to install a KCPI-PIO24 board in a PCI expansion slot on your computer:

1. Turn power OFF to the computer, and to all external circuits if any are attached to the board.

2. Remove the computer chassis cover.

3. Select an unoccupied PCI expansion slot in the rear panel, and remove the corresponding

dummy mounting plate.

4. Insert and secure the board in the selected PCI expansion slot.

Identifying the I/O connector and pin assignments

Figure 3-1 and Table 3-1 show and describe the pin assignments for the I/O connector, a standard
37-pin D type.

Figure 3-2 shows the location of the I/O connector on the board.

«
...
20
21
22
23
24
...
»

Содержание KPCI-PIO24



































































Отзывы:

Нет отзывов