Keithley DMM7510, Справочное руководство

Страница: 970 / 1036

Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual Section 8: TSP command reference
DMM7510-901-01 Rev. B / May 2015 8-357
Example
deviceID = tspnet.connect("192.0.2.1")
print(tspnet.idn(deviceID))
tspnet.disconnect(deviceID)
Assume the instrument is at IP address 192.0.2.1.
The output that is produced when you connect to the
instrument and read the IDN string may appear as:
KEITHLEY INSTRUMENTS,MODEL
DMM7510,00000170,1.0.0a
Also see
tspnet.connect() (on page 8-354)
tspnet.read()
This function reads data from a remote device.
Type TSP-Link accessible Affected by Where saved Default value
Function No
Usage
value1 = tspnet.read( connectionID )
value1 = tspnet.read( connectionID , formatString )
value1 , value2 = tspnet.read( connectionID , formatString )
value1 , ... , valueN = tspnet.read( connectionID , formatString )
value1 The first value decoded from the response message
value2 The second value decoded from the response message
valueN The nth value decoded from the response message; there is one return value for
each format specifier in the format string
... One or more values separated with commas
connectionID The connection ID returned from
tspnet.connect()
formatString Format string for the output, maximum of 10 specifiers
Details
This command reads available data from the remote instrument and returns responses for the
specified number of arguments.
The format string can contain the following specifiers:
%[width]s Read data until the specified length
%[max width]t
Read data until the specified length or until punctuation is found, whichever comes first
%[max width]n Read data until a newline or carriage return
%d Read a number (delimited by punctuation)