Keithley DMM7510 Скачать руководство пользователя страница 561

Страница: 561 / 1036

Section 6: SCPI command reference

Model DMM7510 7½ Digit Graphical Sampling Multimeter Reference Manual

6-234

DMM7510-901-01 Rev. B / May 2015

:TRIGger:STATe?

This command returns the present state of the trigger model.

Type

Affected by

Where saved

Default value

Query only

Not applicable

Usage

:TRIGger:STATe?

Details

This command returns the state of the trigger model. The instrument checks the state of a started
trigger model every 100 ms.

This command returns the trigger state and the block that the trigger model last executed.

The trigger model states are:

•

Idle: The trigger model is stopped.

•

Running: The trigger model is running.

•

Waiting: The trigger model has been in the same wait block for more than 100 ms.

•

Empty: The trigger model is selected, but no blocks are defined.

•

Building: Blocks have been added.

•

Failed: The trigger model is stopped because of an error.

•

Aborting: The trigger model is stopping because of a user request.

•

Aborted: The trigger model is stopped because of a user request.

Example

:TRIG:STAT?

An example output if the trigger model is inactive and ended at block 9 is:

IDLE;IDLE;9

Also see

None

:TRIGger:TIMer<n>:CLEar

This command clears the timer event detector and overrun indicator for the specified trigger timer number.

Type

Affected by

Where saved

Default value

Command only

Not applicable

Usage

:TRIGger:TIMer<n>:CLEar

<n>

Trigger timer number (1 to 4)

Содержание DMM7510













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание DMM7510

Отзывы:

Бренды по названию

Популярные бренды

Keithley DMM7510, Справочное руководство

Результаты поиска

Содержание DMM7510

Отзывы:

Бренды по названию

Популярные бренды