manualshive.com logo in svg

Keithley DAS-8 Series, Руководство пользователя, Страница: 74 / 145

Поделиться
Скачать
Keithley DAS-8 Series Скачать руководство пользователя страница 74

3-25

Configuration with DriverLINX

Follow the DriverLINX on-screen instructions for installation of drivers 
and interfaces. Refer to the 

DriverLINX Installation and Configuration 

Guide

 and 

DriverLINX Appendix F: Configuration and Implementation 

Notes — Keithley DAS-8

 manuals.

Before you configure DriverLINX for operation with the DAS-8 Series 
board, you must specify the base address, interrupt level, and input 
configuration by setting switches on the board.

Installing the Board

Before installing a DAS-8 Series board in your computer, make sure that 
the switches and jumpers on the board are set appropriately and that the 
jumper and switch settings match the settings you configure in 
DriverLINX.

Caution:  

Installing or removing a board with the power ON can cause 

damage to your computer.

To install the board, perform the following steps:

1. Turn power to the computer and all attached equipment OFF.

2. Remove the computer chassis cover.

Select an available slot. The DAS-8 or DAS-8/LT requires a single, short 
slot; the DAS-8/PGA(G2) requires a single, 1/2-slot; the DAS-8/AO 
requires a full slot. 

Caution:  

Be careful when installing a DAS-8/AO board that requires a 

full slot. Some motherboards have components that extend into this space 
and may cause interference.

3. Loosen and remove the screw at the top of the blank adapter plate, 

then slide the plate up and out to remove.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание DAS-8 Series


















































































































































Отзывы:

Нет отзывов