Keithley 9139B-PCA, Инструкция по эксплуатации

Страница: 9 / 43

Section 1: General information Model 9139B Probe Card Adapter Instructions
1-2 9139B-901-01 Rev. A / January 2019
Refer to the manufacturer documentation for your prober for information about connecting hardware
to it. Refer to the documentation provided with your Keithley parametric test system for information
about connections to the system.
Make sure you order the PCA with the correct stack height for your prober. Refer to probe card
adapter with and stack height (on page 6-2)
Features
Key features of the 9139B Probe Card Adapter include:
•
Vacuum lock allows quick exchange of probe cards with accurate and repeatable alignment
•
System supports up to 64 pins at up to 1.1 kV
•
All pins use 1.1 kV triaxial connectors
•
Optional hinged interface mechanism for easy probe card changes
•
Easily connects device under test (DUT) cables to a probe card
•
Each pin supports fully guarded measure and sense lines
•
Maintains test system specifications to the probe tip
•
Preserves full Kelvin connections to the probe tip
•
Reduces capacitance with extended guards
•
Extends low-current capabilities of the Keithley Parametric Test system