Models 707B and 708B Switching Matrix Reference Manual
Section 2: General operation
707B-901-01 Rev. A / August 2010
2-105
Reset a channel
You can reset a channel to its factory default settings. When you reset a channel:
•
A closed channel opens
•
Additional user delay is set to zero
•
Labels return to default value
•
If the channel is forbidden to close, it is cleared from being forbidden to close
•
If the channel is used in channel patterns, the channel patterns that contain the channel are deleted.
Using this function to reset a channel involved in scanning invalidates the existing scan list. The list
has to be recreated before scanning again.
CAUTION
Resetting a channel deletes any channel patterns that contain that channel.
To reset a channel from the front panel:
1. Display a channel.
2. Select the channel you want to reset.
3. Press
CHAN
.
4. Select
RESET
.
5. Select SELECTED, ALL, or CANCEL.
6. Press the navigation wheel
to reset the channel.
To reset all channels on a slot from the web interface:
1. Select the slot that contains channels you want to reset.
2. Click
RESET SLOT
.
3. All channels on the slot are reset.
To reset a channel from the remote interface:
Send the command
channel.reset()
(on page 7-43).
