1-30
Getting Started
Table 1-8
Trigger configuration menu
Configuration menu item
Description
CONFIG TRIG
Configure triggering.
CONFIGURE TRIGGER
ARM LAYER
Configure trigger model arm layer.
ARM IN
Select arm layer detection event.
IMMEDIATE
Immediate event detection.
GPIB
GPIB GET or *TRG.
TIMER
After timer interval elapses, enter interval.
MANUAL
Front panel TRIG key.
TLINK
Enter TLINK line and state.
ONCE
Bypass event detection once.
NEVER
Never bypass event detection.
↓
STEST
When Digital I/O SOT line is pulsed low.
ONCE
Bypass event detection once.
NEVER
Never bypass event detection.
↑
STEST
When Digital I/O SOT is pulsed high.
ONCE
Bypass event detection once.
NEVER
Never bypass event detection.
↑↓
STEST
When Digital I/O SOT line is pulsed high or low.
ONCE
Bypass event detection once.
NEVER
Never bypass event detection.
ARM OUT
Configure arm layer output trigger.
LINE
Select trigger link output line (1-4).
EVENTS
Enable/disable events.
TRIG LAYER EXIT
Enable (ON) or disable (OFF) on exiting trigger layer.
TL ENTER
Enable (ON) or disable (OFF) on entering trigger layer.
COUNT
Specify arm count.
FINITE
Programmable count.
INFINITE
Never ending count.
TRIG LAYER
Configure trigger layer of trigger model.
TRIGGER IN
Select trigger layer detection event.
IMMEDIATE
Trigger event occurs immediately.
TRIGGER LINK
Select trigger link line as event (1-4).
TRIGGER OUT
Configure trigger layer output trigger.
LINE
Select trigger link line (1-4).
EVENTS
Enable (ON) or disable (OFF) for SOURCE, DELAY,
and MEAS.
DELAY
Program trigger delay time.
COUNT
Program trigger count.
HALT
Return unit to idle state.
Содержание 6430
