Section 11: TSP command reference
Series 3700A System Switch/Multimeter Reference Manual
11-266
3700AS-901-01 Rev. D/June 2018
Details
The settings that are restored are shown in the following table.
Settings that are restored to default
Attribute
Default setting
lan.config.dns.address[N]
"0.0.0.0"
lan.config.dns.domain
""
lan.config.dns.dynamic
lan.ENABLE
lan.config.dns.hostname
"K-<model number>-<serial number>"
lan.config.dns.verify
lan.ENABLE
lan.config.gateway
"0.0.0.0"
lan.config.ipaddress
"0.0.0.0"
lan.config.method
lan.AUTO
lan.config.subnetmask
"255.255.255.0"
lan.lxidomain
0
localnode.password
"admin"
The
lan.restoredefaults()
function does not reset the LAN password. The
localnode.password
attribute controls the web password, which can be reset separately.
This command is run when
lan.reset()
is sent.
Example
lan.restoredefaults()
Restores the LAN defaults.
Also see
(on page 11-265)
lan.status.dns.address[N]
This attribute contains the DNS server IP addresses.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute (R)
Yes
Not applicable
Not applicable
Not applicable
Usage
dnsAddress
= lan.status.dns.address[
N
]
dnsAddress
DNS server IP address
N
Entry index (1, 2, or 3)