Section 11: TSP command reference
Series 3700A System Switch/Multimeter Reference Manual
11-240
3700AS-901-01 Rev. D/June 2018
eventlog.next()
This function returns the oldest unread event message from the event log and removes it from the event log.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Function
Yes
Usage
logString
= eventlog.next()
logString
The next log entry
Details
Returns the next entry from the event log and removes it from the log.
If there are no entries in the event log, returns the value
nil
.
Example 1
print(eventlog.next())
Get the oldest message in the event log and remove that entry from the log.
Output:
17:28:22.085 10 Oct 2009, LAN2, 192.168.1.102, LXI, 0, 1192037134, <no time>, 0,
0x0
Example 2
print(eventlog.next())
If you send this command when there is nothing in the event log, you will get the following output:
nil
Also see
(on page 11-238)
(on page 11-238)
(on page 11-241)
