Keithley 3700A Series, Справочное руководство

Страница: 229 / 936

Section 6: Reading buffers Series 3700A System Switch/Multimeter Reference Manual
6-2 3700AS-901-01 Rev. D/June 2018
You cannot use top-level command names and reserved words as buffer names. These names are
listed in the following table.
Top level command names
and function reset
beeper gettimezone return
bit gpib scan
break if schedule
channel in script
comm io settime
dataqueue lan settimezone
delay local setup
digio localnode slot
display makegetter status
dmm makesetter then
do memory timer
else nil trigger
elseif not true
end opc tsplink
errorqueue or tspnet
eventlog os until
exit print upgrade
false printbuffer userstring
for printnumber waitcomplete
format ptp while
fs repeat
The various instrument operations, including buffer operation, are performed on the input signal in a
predetermined order. For example, if both REL and MXB (a math operation) are enabled, the REL
operation is always done before MXB.
Front-panel buffer operation
In the following procedures, pressing in the navigation wheel will perform the same function as
pressing the
ENTER key. Also, you can turn the navigation wheel instead of using the CURSOR
keys.
Read Creating and selecting a reading buffer (on page 6-3) or Selecting a reading buffer (on page 6-
3) before performing the following procedures:
•
Storing readings (on page 6-3)
•
Saving readings (on page 6-4)
•
Clearing readings (on page 6-4)
•
Deleting a reading buffer (on page 6-4)
•
Recalling readings (on page 6-5)
•
Buffer configuration (front panel) (on page 6-6)
•
Appending readings (on page 6-6)