Series 3700 System Switch/Multimeter User's Manual
Section 4: Close-open overview
3700S-900-01 Rev. C / July 2008
4-5
1. To change the present slot, press the navigation wheel, and the first digit of
the four-digit channel number flashes, indicating edit mode. Turn the
navigation wheel to change the number to select any slot that has a
switching module or pseudocard installed. For example, change the digit to
a 1.
2. Press the navigation wheel a second time. This accepts the slot selection
(above) and selects edit mode for the channel. Digits two through four of the
four digit channel number flash, indicating edit mode. Turn the navigation
wheel to change the starting channel number (any channel available for the
selected slot's module can be selected). For example, change the digits to
003.
3. Press the navigation wheel a third time. This accepts the channel selection
(above) and selects edit mode for the channel range. Digits two through four
of the smaller four digit channel number flash, indicating edit mode. Turn the
navigation wheel to change the ending channel number (any channel
available for the selected slot's module can be selected). For example,
change the digits to 005.
4. Press the navigation wheel a fourth time to accept the channel selection.
5. Press the navigation wheel a fifth time to return to the main display after
selecting the desired user configuration for the channel range.
6. Press the
CONFIG
key followed by
CHAN
key to change other channel
attributes for the range. Likewise, press the
CHAN
key without the
CONFIG
key to bring up the
CHANNEL ACTION MENU
for use with the selected
channel range.
