Section 2: Using the Front Panel
Series 3700 System Switch/Multimeter User's Manual
2-6
3700S-900-01 Rev. C / July 2008
Front panel DMM attribute
Symbol
Values
auto zero
AZ
+ for ON or
– for OFF
line sync
LS
+ for ON or
– for OFF
limit
LIM
+ for a limit enabled or
– for limits disabled
detector bandwidth
DBW
3, 30, or 300
threshold
THR=
n, where n indicates the threshold
aperture
A=
n, where n indicates the aperture setting
dry circuit
DRY
+ for ON or
– for OFF
offset compensation
OC
+ for ON or
– for OFF
thermocouple sensor K
K_T/C
N/A
thermocouple sensor T
T_T/C
N/A
thermocouple sensor E
E_T/C
N/A
thermocouple sensor R
R_T/C
N/A
thermocouple sensor S
S_T/C
N/A
thermocouple sensor B
B_T/C
N/A
thermocouple sensor N
N_T/C
N/A
thermistor
THRM
N/A
three-wire RTD
3RTD
N/A
4-wire RTD
4RTD
N/A
simulated reference junction
RJ_SIM
N/A
internal reference junction
RJ_INT
N/A
external reference junction
RJ_EXT
N/A
NOTE
To access the main menu, press the
MENU
key.
See the following figure for a menu example. In the example, the MAIN MENU is
displayed. Turn the navigation wheel (6) or press the
CURSOR
keys to scroll
through the available menu items. In the following figure's first display, there is a
right arrow indicator. This indicates there are additional menu items to the right.
In the figure's second display, both right and left arrows are active, indicating
that there are additional items in both directions. To select the highlighted
(flashing) menu item, press the navigation wheel or press the
ENTER
key.