Keithley 2657A Скачать руководство пользователя страница 752 | Manualshive

Страница: 752 / 805

Keithley 2657A Скачать руководство пользователя страница 752

Appendix C: LAN concepts and settings

Model 2657A High Power System SourceMeter® Instrument Reference Manual

C-12

2657A-901-01 Rev. B/December 2012

Configuring the domain name system (DNS)

The domain name system (DNS) lets you type a domain name in the address bar to connect to the
instrument. If you use DNS, you can use a name instead of an IP address.

Example:

Model2657A.XYZcompany.com

Contact your corporate information technology (IT) department to learn more about DNS. If a DNS
server is not part of the LAN infrastructure, this setting is not used.

To enable or disable DNS host name verification:

1. From the front panel, press the

MENU

key, and then select

LAN > CONFIG > DNS > VERIFY

.

2. Turn the navigation wheel

to select either

ENABLE

or

DISABLE

. When enabled, the

instrument performs a DNS lookup to verify the DNS host name matches the value specified in
the

lan.config.dns.hostname

(on page 7-111) attribute.

3. Press

the

ENTER

key.

4. Press

the

EXIT (LOCAL)

key twice to return to the LAN CONFIG menu.

5. Select

APPLY_SETTINGS > YES

, and then press the

ENTER

key.

To enable or disable DNS registration:

1. From the front panel, press the

MENU

key and select

LAN > CONFIG > DNS > DYNAMIC

.

2. Turn the navigation wheel

to select either

ENABLE

or

DISABLE

. DNS registration works with

the DHCP to register the host name specified in the

lan.config.dns.hostname

attribute with

the DNS server.

3. Press

the

ENTER

key.

4. Press

the

EXIT (LOCAL)

key twice to return to the LAN CONFIG menu.

5. Select

APPLY_SETTINGS > YES

, and then press the

ENTER

key.

To set the DNS server IP addresses:

1. From the front panel, press the

MENU

key and select

LAN > CONFIG > DNS

.

2. Turn the navigation wheel

to select either

DNS-ADDRESS1

or

DNS-ADDRESS2

.

3. Press the

ENTER

key.

4. Turn the navigation wheel

to select and enter a valid IP address for the DNS server.

5. Press the

ENTER

key.

6. Press the

EXIT (LOCAL)

key twice to return to the LAN CONFIG menu.

7. Select

APPLY_SETTINGS > YES

, and then press the

ENTER

key.

LAN speeds

Another characteristic of the LAN is speed. The Model 2657A negotiates with the host computer and
other LXI-compliant devices on the LAN to transmit data at the highest speed possible. LAN speeds
must be configured to match the speed of the other instruments on the network.

NOTE

«
...
750
751
752
753
754
...
»

Содержание 2657A






































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов