![background image](http://html2.mh-extra.com/html/keithley/2657a/2657a_reference-manual_4007750598.webp)
Model 2657A High Power System SourceMeter® Instrument Reference Manual
Section 7: TSP command reference
2657A-901-01 Rev. B/December 2012
7-285
Bit
B15 B14 B13 B12 B11 B10 B9 B8
Binary
value
0/1 0/1 0/1 0/1 0/1 0/1 0/1 0/1
Decimal
32,768 16,384 8,192 4,096 2,048 1,024 512 256
Weights
(2
15
) (2
14
) (2
13
) (2
12
) (2
11
) (2
10
) (2
9
) (2
8
)
Example
status.operation.instrument.trigger_blender.trigger_overrun.enable
= status.operation.instrument.trigger_blender.trigger_overrun.BLND1
Uses a constant to set the bit for blender 1 of the operation status trigger blender overrun enable
register.
Also see
status.operation.instrument.trigger_blender.*
(on page 7-282)
status.operation.instrument.trigger_timer.*
This attribute contains the operation status trigger timer summary register set.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute
- -
- -
- -
- -
.condition (R)
Yes
Not applicable
Not saved
Not applicable
.enable (RW)
Yes
Status reset
Not saved
0
.event (R)
Yes
Status reset
Not saved
0
.ntr (RW)
Yes
Status reset
Not saved
0
.ptr (RW)
Yes
Status reset
Not saved
1024 (All bits set)
Usage
operationRegister
= status.operation.instrument.trigger_timer.condition
operationRegister
= status.operation.instrument.trigger_timer.enable
operationRegister
= status.operation.instrument.trigger_timer.event
operationRegister
= status.operation.instrument.trigger_timer.ntr
operationRegister
= status.operation.instrument.trigger_timer.ptr
status.operation.instrument.trigger_timer.enable =
operationRegister
status.operation.instrument.trigger_timer.ntr =
operationRegister
status.operation.instrument.trigger_timer.ptr =
operationRegister
operationRegister
The status of the operation status trigger timer summary register; a zero (0)
indicates no bits set (also send 0 to clear all bits); the only valid value other than 0 is
1024
Details
These attributes are used to read or write to the operation status trigger timer summary registers. Reading a
status register returns a value. The binary equivalent of the returned value indicates which register bits are set.
The least significant bit of the binary number is bit B0, and the most significant bit is bit B15.
For information about .condition, .enable, .event, .ntr, and .ptr registers, refer to
(on
Enable and transition registers
(on page E-19). The individual bits of this register are defined in
the following table.
Содержание 2657A
Страница 3: ......