![background image](http://html2.mh-extra.com/html/keithley/2657a/2657a_reference-manual_4007750568.webp)
Model 2657A High Power System SourceMeter® Instrument Reference Manual
Section 7: TSP command reference
2657A-901-01 Rev. B/December 2012
7-255
Bit Value
Description
B0
Not used
Not applicable.
B1
status.measurement.instrument.SMUA
Set bit indicates one or more enabled bits of
the measurement event SMU A summary
register is set.
Bit B1 decimal value: 2
Binary value: 0000 0010
B2-B15
Not used
Not applicable.
As an example, to set bit B1 of the measurement event instrument summary enable register, set
status.measurement.instrument.enable = status.measurement.instrument.SMUA
.
In addition to the above constant,
measurementRegister
can be set to the decimal equivalent of the bit to set.
Example
status.measurement.instrument.enable =
status.measurement.instrument.SMUA
Sets the SMU A bit of the
measurement event instrument
summary enable register using a
constant.
Also see
status.measurement.instrument.smuX.*
This attribute contains the registers of the measurement event SMU X summary register set.
Type
TSP-Link accessible
Affected by
Where saved
Default value
Attribute
- -
- -
- -
- -
.condition (R)
Yes
Not applicable
Not saved
Not applicable
.enable (RW)
Yes
Status reset
Not saved
0
.event (R)
Yes
Status reset
Not saved
0
.ntr (RW)
Yes
Status reset
Not saved
0
.ptr (RW)
Yes
Status reset
Not saved
399 (All bits set)
Usage
measurementRegister
= status.measurement.instrument.smu
X
.condition
measurementRegister
= status.measurement.instrument.smu
X
.enable
measurementRegister
= status.measurement.instrument.smu
X
.event
measurementRegister
= status.measurement.instrument.smu
X
.ntr
measurementRegister
= status.measurement.instrument.smu
X
.ptr
status.measurement.instrument.smu
X
.enable =
measurementRegister
status.measurement.instrument.smu
X
.ntr =
measurementRegister
status.measurement.instrument.smu
X
.ptr =
measurementRegister
measurementRegister
The status of the instrument measurement status SMU X summary register; a
zero (0) indicates no bits set (also send 0 to clear all bits); other values indicate
various bit settings
X
Source-measure unit (SMU) channel (for example
status.measurement.instrument.smua.enable
applies to SMU
channel A)
Содержание 2657A
Страница 3: ......