![background image](http://html2.mh-extra.com/html/keithley/2657a/2657a_reference-manual_4007750319.webp)
Section 7: TSP command reference
Model 2657A High Power System SourceMeter® Instrument Reference Manual
7-6
2657A-901-01 Rev. B/December 2012
Command usage
The Usage section of the remote command listing shows how to properly structure the command.
Each line in the Usage section is a separate variation of the command usage; all possible command
usage options are shown here.
Figure 105: Command usage section
1. Structure of command usage:
Shows how the parts of the command should be organized.
2. User-supplied
parameters:
Indicated by italics. For example, for the function
beeper.beep(
duration, frequency
)
, replace
duration
with the number of seconds and
frequency
with the frequency of the tone. For example,
beeper.beep(2, 2400)
generates a
two-second, 2400 Hz tone.
If there are optional parameters, they must be entered in the order presented in the Usage section.
You cannot leave out any parameters that precede the optional parameter. Optional parameters are
shown as separate lines in usage, showing each permutation of the command. For example:
text
= display.gettext()
text
= display.gettext(
embellished
)
text
= display.gettext(
embellished
,
row
)
text
= display.gettext(
embellished
,
row
,
columnStart
)
text
= display.gettext(
embellished
,
row
,
columnStart
,
columnEnd
)
3. Parameter value options:
Descriptions of the options that are available for the user-defined
parameter.
Command details
This section lists additional information you need to know to successfully use the remote commands.
Figure 106: Details section of command listing
Example section
The Example section of the remote command description shows some simple examples of how the
command can be used.
Usage
state
= beeper.enable
beeper.enable =
state
state
Disable the beeper
(beeper.OFF
or
0
)
Enable the beeper
(beeper.ON
or
1
)
Parameter value options
User-defined
parameter
Structure of command usage
3
1
2
NOTE
Details
This command enables or disables the beeper. When enabled, a beep signals that a front-panel key has been
pressed. Disabling the beeper also disables front-panel key clicks.
Содержание 2657A
Страница 3: ......