![background image](http://html1.mh-extra.com/html/keithley/2600a-series/2600a-series_reference-manual_4006539595.webp)
2600AS-901-01 Rev. B / September 2008
Return to
19-273
Series 2600A System SourceMeter® Instruments Reference Manual
Section 19: Remote Commands
KIParlib
The KIParlib factory script is made up of two functions:
gm_vsweep()
and
gm_isweep()
.
Table 19-23
KIParlib TSP test script: gm_vsweep()
TSP project name:
KIParlib
TSP test script name:
KIParlib
Function:
gm_vsweep(smu, start_v, stop_v, points)
Description
The
gm_vsweep()
function performs a linear voltage sweep, measuring voltage
and current and then calculates the transconductance (Gm) at each point using
the central difference method. It can return an array of Gm values, a reading
buffer with the measured currents, and a reading buffer with the measured
voltages.
Parameters
smu, start_v, stop_v, points
smu:
SourceMeter instrument Channel (A or
B).
start_v:
Starting voltage level of the sweep.
stop_v:
Ending voltage level of the sweep.
points:
Number of measurements between
start_v and stop_v (must be
≥
2).
Return
values
•
gm_array
: a Lua table containing the calculated Gm values at each point.
•
ibuf:
a reading buffer containing the measured current at each point.
•
vbuf:
a reading buffer containing the measured voltage at each point.
Output
Data
Transconductance values, reading buffer with measured currents, reading buffer
with measured currents and voltages.
Examples
•
gm_array = gm_vsweep(smua, 0, 5, 20)
SMU A returns Gm values only.
•
gm_array, ibuf = gm_vsweep(smua, 0, 5, 20)
SMU A returns Gm and reading buffer with measured currents.
•
gm_array, ibuf, vbuf = gm_vsweep(smua, 0, 5, 20)
SMU A returns Gm and reading buffers with measured currents and voltages.