manualshive.com logo in svg

Keithley 2600a series, Справочное руководство, Страница: 473 / 696

Поделиться
Скачать
Keithley 2600a series Скачать руководство пользователя страница 473

2600AS-901-01 Rev. B / September 2008

Return to 

Section Topics

19-151

Series 2600A System SourceMeter® Instruments Reference Manual

Section 19: Remote Commands

 

 status.condition

Attribute

Status byte register.

TSP-Link 
accessibility

This attribute can be accessed from a remote TSP-Link node.

Usage

Reads the status byte register:

statbyte = status.condition

 

Remarks

• This attribute is used to read the status byte, which is returned as a numeric value. The binary 

equivalent of the returned value indicates which register bits are set. The least significant bit of 
the binary number is bit 0, and the most significant bit is bit 7. 

• For example, assume value 129 is returned for the condition register. The binary equivalent is 

10000001. This value indicates that bit B0 (MSB) and bit B7 (OSB) are set.

• The bits of the status byte register are described as follows:

•

Bit B0, Measurement Summary Bit (MSB):

 Set summary bit indicates that an enabled 

measurement event has occurred.

•

Bit B1, System Summary Bit (SSB):

 Set summary bit indicates that an enabled system 

event has occurred.

•

Bit B2, Error Available (EAV):

 Set summary bit indicates that an error or status message is 

present in the Error Queue.

•

Bit B3, Questionable Summary Bit (QSB):

 Set summary bit indicates that an enabled 

questionable event has occurred.

•

Bit B4, Message Available (MAV):

 Set summary bit indicates that a response message is 

present in the Output Queue.

•

Bit B5, Event Summary Bit (ESB):

 Set summary bit indicates that an enabled standard 

event has occurred.

•

Bit B6, Request Service (RQS)/Master Summary Status (MSS):

 Set bit indicates that an 

enabled summary bit of the Status Byte Register is set. Depending on how it is used, Bit B6 
of the Status Byte Register is either the Request for Service (RQS) bit or the Master 
Summary Status (MSS) bit:

 

- When using the GPIB or VXI-11 serial poll sequence of the SourceMeter instrument to 
obtain the status byte (serial poll byte), B6 is the RQS bit.

 

- When using 

status.condition

 or the 

*STB?

 common command to read the status byte, 

B6 is the MSS bit.

•

Bit B7, Operation Summary (OSB):

 Set summary bit indicates that an enabled operation 

event has occurred.

Details

See 

Status byte and service request (SRQ)

 in 

Appendix C

.      

Example

Reads the status byte:

statbyte = status.condition

print(statbyte)

Output: 

1.02

The above output indicates that bits B0 (MSS) and B7 (OSB) are set.

Содержание 2600a series

























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов