Keithley 2600a series Скачать руководство пользователя страница 418

Страница: 418 / 696

19-96

Return to

Section Topics

2600AS-901-01 Rev. B / September 2008

Section 19: Remote Commands

Series 2600A System SourceMeter® Instruments Reference Manual

reset

printnumber

Function

Prints numbers using the format selected for printing reading buffers.

TSP-Link
accessibility

This function cannot be accessed from a remote TSP-Link node.

Usage

There are multiple ways to use this function, depending on how many numbers are to be printed:

printnumber(v1)

printnumber(v1 ,v2)

printnumber(v1 ,v2, ..., vn)

v1, v2, ..., vn

Numbers to print.

Remarks

• This function will print the given numbers using the data format specified by

format.data

and

other associated attributes.

• At least one number must be given.

Also see

printbuffer

format.data

Example

Prints three measurements that were previously performed:

format.data = format.ASCII

printnumber(i, v, t)

Example of returned data (i, v, t):

1.02345E-04, 8.76542E-02, 5.29372E-01

reset

Function

Resets the logical instruments to the default settings.

TSP-Link
accessibility

This function cannot be accessed from a remote TSP-Link node.

Usage

reset()

reset(system)

system

Flag indicating what part of the system to reset. Can
be set to

true

false

Remarks

• If

system

is set to

true

and the node is the master, the entire system will be reset.

• If

system

is set to

false

, only the local group will be reset.

• The default value of

system

when no value is given is

true

• This function resets all logical instruments in the system or local group. This function is

equivalent to iterating over all the logical instruments and calling the reset method of each.

• Resetting the entire system is only permitted when the node is the master. If the node is not the

master, it generates an error.

Also see

localnode.reset

smuX.reset

Содержание 2600a series

























































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 2600a series

Отзывы:

Keithley 2600a series, Справочное руководство, Страница: 418 / 696

Результаты поиска

Содержание 2600a series

Отзывы: