manualshive.com logo in svg

Keithley 2600a series, Справочное руководство, Страница: 416 / 696

Поделиться
Скачать
Keithley 2600a series Скачать руководство пользователя страница 416

19-94

Return to 

Section Topics

2600AS-901-01 Rev. B / September 2008

Section 19: Remote Commands

Series 2600A System SourceMeter® Instruments Reference Manual

meminfo

opc

This function sets the OPC bit in the status register when all overlapped commands are 
completed.

meminfo

 

Function

Returns the current amount of available memory and the total amount of memory in the instrument.

TSP-Link 
accessibility

This function cannot be accessed from a remote TSP-Link node.

Usage

freemem, totalmem = meminfo()

 

freemem 

Amount of free dynamically allocated memory available.

totalmem 

The total amount of dynamically allocated memory 
in the instrument.

Remarks

• This function returns two values:

•

The amount of free dynamically allocated memory available in kilobytes. 

•

The total amount of dynamically allocated memory on the instrument in kilobytes. 

• The difference between the two is the amount currently used.

opc

 

Function

Sets the Operation Complete status bit when all overlapped commands are completed.

TSP-Link 
accessibility

This function cannot be accessed from a remote TSP-Link node.

Usage

opc()

Remarks

• This function will cause the Operation Complete bit in the Standard Event Status Register to be 

set when all previously started local overlapped commands are complete. Note that each node 
will independently set their Operation Complete bits in their own status models.

• Any nodes not actively performing overlapped commands will set their bits immediately. All 

remaining nodes will set their own bits as they complete their own overlapped commands.

Details

See 

Appendix C

.       

Also see

waitcomplete

Содержание 2600a series

























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов