![background image](http://html1.mh-extra.com/html/keithley/2600a-series/2600a-series_reference-manual_4006539402.webp)
19-80
Return to
2600AS-901-01 Rev. B / September 2008
Section 19: Remote Commands
Series 2600A System SourceMeter® Instruments Reference Manual
lan.trigger[N]
lan.trigger[N].assert
Replace N with values 1-8.
Function
Generates a trigger.
TSP-Link
accessibility
This function can be accessed from a remote TSP-Link node.
Usage
lan.trigger[lanevent].assert()
lanevent
The LAN event number.
Remarks
• Generates and sends a LAN trigger packet for the LAN event number specified.
• Sets the pseudostate to the appropriate state.
• The following indexes will provide the listed LXI events:
1:LAN0
2:LAN1
3:LAN2
...
8:LAN7
lan.trigger[N].clear
Replace N with values 1-8.
Function
Clears a trigger.
TSP-Link
accessibility
This attribute can be accessed from a remote TSP-Link node.
Usage
lan.trigger[lanevent].clear()
lanevent
The LAN event number.
Remarks
• A trigger's event detector remembers if an event has been detected since the last
lan.trigger[n].wait
call.
• This function clears a trigger's event detector and discards the previous history of the LAN
trigger event.
• This function clears all overruns associated with this LAN trigger.
lan.trigger[N].connect
Replace N with values 1-8.
Function
Prepares the event generator for outgoing trigger events.
TSP-Link
accessibility
This function can be accessed from a remote TSP-Link node.
Usage
lan.trigger[lanevent].connect()
lanevent
The LAN event number.
Remarks
• Prepares the event generator to send event messages. For TCP connections, this will open the
TCP connection.
• The event generator will automatically disconnect when either the
lan.trigger[n].protocol
or
lan.trigger[n].ipaddress
attributes for this event are
changed.