![background image](http://html1.mh-extra.com/html/keithley/2600a-series/2600a-series_reference-manual_4006539297.webp)
2600AS-901-01 Rev. B / September 2008
Return to
16-5
Series 2600A System SourceMeter® Instruments Reference Manual
Section 16: LAN Concepts and Settings
Figure 16-2
Internet protocol (TCP/IP) properties dialog box
Step 3: Configure the Instrument's LAN settings
To configure the Series 2600A using the front panel:
1.
Press the
MENU
key to display the MAIN MENU. Use the
navigation wheel
to select
LAN
to display the LAN MENU.
2.
Change the IP address assignment method:
a.
Select
CONFIG
>
METHOD
>
MANUAL
, then press the
ENTER
key.
b.
Press the
EXIT
key once to return to the LAN MENU.
c.
Select
APPLY_SETTINGS
>
YES
, then press the
ENTER
key.
3.
Enter the IP address using the LAN MENU:
a.
Select
CONFIG
>
IP-ADDRESS
.
b.
Refer to the recorded computer's IP address. A portion of the computer's IP address will
be used as a base for the instrument's unique ID. Only the last three numbers (after the
last decimal point) will be different between the PC and instrument. The last three digits
may be anything from 1-255 for a subnet mask of 255.255.255.0.
For example, the Internet Protocol (TCP/IP) Properties dialog box in
shows
that the computer's IP address is 192.168.1.1. A unique address for the instrument is
192.168.001.101.